Converting a bathtub into a walk-in shower is one of the most practical bathroom projects available to Puyallup homeowners who no longer use the tub regularly. The change frees up footprint, simplifies the daily shower experience, and allows for a waterproofing rebuild that addresses any moisture damage that may have accumulated behind the original tub surround.
Converting a bathtub into a walk-in shower is one of the most practical bathroom projects available to Puyallup homeowners who no longer use the tub regularly. The change frees up footprint, simplifies the daily shower experience, and allows for a waterproofing rebuild that addresses any moisture damage that may have accumulated behind the original tub surround.
A tub-to-shower conversion involves removing the existing tub body and surround, reconfiguring the drain to a shower-appropriate location, building up the shower floor with proper slope, installing waterproofing, and tiling the new enclosure. In many Puyallup homes, this project also reveals water infiltration behind the original tub that is addressed during the conversion process.
This service is part of our conversion services we provide throughout Puyallup and Pierce County WA. Call (253) 765-4253 to discuss your project.
Every project includes comprehensive craftsmanship, premium waterproofing, and dedicated management from start to finish.
Every tub to shower conversion project follows a clear process to protect your home and deliver a quality result.
The existing tub, surround, and plumbing are assessed. Drain location feasibility for a new walk-in shower is confirmed and subfloor condition is evaluated.
The existing tub body, surround panels or tile, and backer board are removed. Any underlying moisture damage to framing and subfloor is remediated.
A new shower drain is installed at the proper slope. High-grade waterproofing membrane is installed across the floor pan and shower walls.
Floor and wall tiles are set with moisture-resistant grout. Built-in niche shelving and bench options are crafted during this phase.
Custom glass doors or fixed panels are mounted once tile is set. Shower valves, showerhead, and drain trim are installed and plumbed.
Perimeter silicone seals and trim are applied. Water testing is performed to verify flawless drainage and seal integrity before walkthrough.
Contact us to discuss your project, review your goals, and establish an accurate scope based on your bathroom conditions.
The scope depends on what is found behind the existing tub. In straightforward cases with clean framing and an accessible drain, the conversion can be completed relatively quickly. When significant moisture damage is found, or when the drain requires extensive relocation, the scope increases. A site evaluation helps establish an accurate timeline and cost estimate.
Not always. A new shower drain can sometimes be positioned at the existing tub drain location, particularly in standard alcove tub configurations. When the tub drain location does not align with the correct shower drain placement for the floor slope, relocation is required.
It can be reversed in principle, though it requires rebuilding the tub deck, replacing the tub drain assembly, and modifying the shower plumbing. Most homeowners who complete a conversion do not reverse it. If resale flexibility is a concern, maintaining a tub in at least one bathroom is generally recommended by real estate advisors.
Yes. This is an ideal time to incorporate a curbless entry, grab bar blocking, a fold-down bench, and a handheld showerhead. These features can be integrated into the conversion scope without significant additional cost.
Yes. A standard alcove tub typically occupies approximately 60 by 32 inches. A shower built in that footprint is a workable size. The entry can be positioned on the long side with a glass door, or the enclosure can be opened with a frameless panel configuration.
