Replacing a bathtub in a Puyallup home addresses a range of issues: cracked acrylic, irreparable staining, outdated colors, structural deterioration, or simply a preference for a different tub configuration. The replacement process involves removing the existing tub and surround, evaluating the underlying structure, and installing the new tub body with a properly waterproofed surround.
Replacing a bathtub in a Puyallup home addresses a range of issues: cracked acrylic, irreparable staining, outdated colors, structural deterioration, or simply a preference for a different tub configuration. The replacement process involves removing the existing tub and surround, evaluating the underlying structure, and installing the new tub body with a properly waterproofed surround.
Bathtub replacement is also an opportunity to update the surrounding tile or panels, upgrade the plumbing fixtures, and address any moisture damage discovered when the original tub is removed. In older Puyallup homes, tub surrounds installed without adequate waterproofing frequently show moisture infiltration behind the walls, and replacement is the appropriate time to correct these conditions.
This service is part of our bathroom services we provide throughout Puyallup and Pierce County WA. Call (253) 765-4253 to discuss your project.
Every project includes comprehensive craftsmanship, premium waterproofing, and dedicated management from start to finish.
Every bathtub replacement project follows a clear process to protect your home and deliver a quality result.
Existing tub, surround, and plumbing are evaluated. The scope of surround replacement (tile vs. acrylic panel) and new tub specifications are confirmed.
The existing bathtub and surround are removed. Underlying framing, subfloor condition, and moisture barriers are inspected and repaired.
The new tub body is set, leveled, and bedded with mortar support where required. Drain, overflow assembly, and supply lines are connected.
Waterproof backer is placed around the tub alcove, followed by tile surround setting or custom panel fitting.
Tub filler faucet, spout, showerhead, and trim are installed and tested for optimal pressure and water flow.
All tub-to-wall and floor transitions are sealed with mold-resistant silicone. The entire installation undergoes final functional testing and cleanup.
Contact us to discuss your project, review your goals, and establish an accurate scope based on your bathroom conditions.
Acrylic tubs are lightweight, warm to the touch, and available in a wide range of configurations. Cast-iron offers excellent heat retention and durability but requires a structurally confirmed floor to support the weight. Fiberglass is lightweight and lower cost. The right choice depends on the intended use, floor structure, and budget.
Not necessarily. If the existing tile surround is structurally sound and in good condition, it may remain in place while only the tub body is swapped. However, removing a tub without accessing what is behind the surrounding tile is difficult, and any surround damage or moisture intrusion discovered during tub removal will need to be addressed.
Acrylic and fiberglass tubs flex under load if not properly supported. A mortar bed installation places a layer of mortar beneath the tub base, providing rigid support across the full base surface. This industry-standard practice prevents the tub floor from cracking under flexing over time.
In most alcove tub configurations the drain end is established by the tub model selected. Changing the drain end from left to right (or vice versa) requires selecting a tub with the drain outlet in the desired position, not moving the in-floor drain. Completely relocating the drain opening in the floor requires plumbing work.
A standard alcove tub replacement with a new prefabricated surround typically takes three to five days. Projects requiring tile-setting around a new tub or significant repairs to moisture-damaged framing take longer.
